Remote Control

Header Screws (6) by Traxxas Radio ControlItem Number: TRX2556

The ideal solution for many of your modeling needs. This tubing has been specially formulated to shrink up to one half its original diameter simply by using a heat gun, soldering iron, or cigarette lighted. Ideal for insulating electrical splices, and also covering electrical plugs and connectors. All come in 3 (76mm) lengths.

Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles

Heavy Duty E/Z Connectors come complete with 2 each Steel Connector, 4-40 x 3/16 Socket Head Cap Screw, and push on steel washer.

For large aircraft .91 and larger, comes complete with high quality aluminum horns, washers, steel 8-32 long shaft, nuts, horn arms, and cleveses (for 4-40 rods) with aluminum pivot pins plus 15ft. of nylon coated stranded steel cable (.032 dia.) and all mounting hardware for 4-40.

These E/Z Adjust Strip Aileron Horn Sets are easy to install. Comes complete with a threaded strip aileron horn which has 3/4 adjustment range, E/Z Adjust Nylon Horn Bracket for easy adjustment and nylon housing which is glued in the wing for friction free aileron operation. Heavy Duty E/Z Adjust is for 6/32 thread.

Heavy Duty E/Z Connectors come complete with 2 each Steel Connector, 4-40 x 3/16 Socket Head Cap Screw, black snap washer, and push on steel washer.

Built to take heavy loads, 3/4" (19mm) Wide X 1-3/8" (35mm) Long X .040" (1mm) thick. Removable 3/64" (1.2) diameter cotter pin for maximum convenience and strength. Ideal for big airplanes.

Hex Wheel Hub 2.5x12mm Front Rustler/Stampede by Traxxas Radio ControlItem Number: TRX3654

Preinstalled aluminum heat sink to help dissipate heat and prolong servo life

Du-Bro Hinge Slotter Kit takes the hassle out of slotting control surfaces for gluing hinges. The centering/parallel guide centerd hinge slotter on up to 3/4" material. Four handle set plus guide and centering tool for three different size slotting forks: mini, standard and heavy duty hinges. Designed to work with all Du-Bro hinges. The 3 slotters and the "picker" are permanently mounted to red nylon handles. Packedged in reusable, recyclable clamshell storage blister.

This scale model of the popular west coast catamaran, the Hobie Cat 14 is an all wood kit that includes nylon sails. Itis easy to build and she is fast and fun to free. Length 14 inches Beam 6-1/2 inches Mast 22-1/4 inches Sail Control Unit Not designed for radio control.